|
|
|
|
|
|
|
|
|
Double-drum winch
| Глоссарий терминов в лесозаготовках и производстве пиломатериалов |
Winch consisting of two drums controlled separately-one for the dragline and the other for the haul-back line. sometimes mounted on and powered by a tractor (26).
|
|
Double-drum hoist, английский
Double-drum reel, английский
Winch, английский
- Treuil
- Steel spool connected to a power source. used for reeling or unreeling cable. also known as drum (22).
- Лебедка
- Ворот, леб?дка
- A machine for pulling or lifting heavy weights. it has a rotating drum around which a pulling line or rope is turned; a hoist, 2. wind 1. british term for twist. 2. a once-used synonym for warped or wined.
- A deck-mounted drum with a handle offering mechanical advantage when used to trim sheets. winches may also be mounted on the mast to assist with raising sails.
- Лебёдка
- [1] a hand-cranked windlass used to increase hauling power when raising or trimming sails, or pulling lines. [2] a similar but larger steam or electric powered machine with a drum to coil cable, chain, or hawsers. a winch/windlass has a horizontal drum, while a capstan has a vertical one.
- A synonym for hoist. formerly, a manpower hoisting machine, consisting of a horizontal drum with crank handles.
- Лебёдка air ~ пневматическая лебёдка
- Beck
Winch, английский
Winch clause, английский
Winch driver, английский
Winch handle, английский
- Ручка ворота
- Рукоятка лебедки
Winch launch operation, английский
Winch operator, английский
Winch,tugger (маленькая, английский
Winchellite, английский
Winches, английский
Winches & drilline spooler, английский
Winchester, английский
Winchester drive, английский
Winchite, английский
Winchman, английский
Controlled, английский
- Управляемый; регулируемый
- Управляемый
- Подконтрольный (о предприятиях)
|
High-lead logging, английский
Wire rope system that involves yarding in logs or trees by means of a rope passing through a block at the top of the head spar (24).
Kerf, английский
- Width of the cut made by a saw blade (22).
- The cut made by a saw blade.
- The thickness of the wall of the diamond-inset part of the crown of a core bit.
- Sometimes incorrectly used as a synonym for nose, as applied to a diamond core bit.
- The annular groove cut into a rock formation by a core bit.
- The width of a cut used to create wafers from silicon ingots, often resulting in the loss of semiconductor material.
|
|
|
|
|
|
|
