|
|
|
|
|
|
|
|
|
Puddle weld
| Глоссарий по архитектуре и конструкциям |
A type of plug weld for joining two sheets of light-gauge material; a hole, burned in the upper sheet, is filled with a puddle of weld metal to fuse the upper sheet to the lower. puddling 1. inducing compaction in mortar or concrete by the use of a tamping rod. 2.
|
|
Puddle, английский
To compact loose soil by first soaking it and then permitting it to dry. puddle, clay puddle, puddling clay to which a little water has been added and which then has been tempered, to make it homogeneous and to increase its plasticity; used to prevent the passage of water.
Puddle break through, английский
Puddle roll, английский
Puddle type, английский
Puddle., английский
Puddled adobe construction, английский
A primitive wall construction once used in what is now the american southwest; built up of successive layers of an adobe mixture containing enough water so that it could be poured. the first layer was poured directly on the ground and allowed to dry before the next layer was poured on top of it; successive layers were built up until the wall reached its full height. such walls eroded easily.
Puddled earth, английский
A soil composed largely of clay and silt mixed with water; used to make adobe bricks.
Puddled steel, английский
Puddler, английский
Weld, английский
- A metal jointing method accomplished by introducing heat of high enough temperature to allow two adjoining surfaces to melt and fuse to one another. “with motion” – objects sighted through a concave (minus) lens move in the same direction as a concave lens when it is moved from side to side.
- To unite metals by heating them to suitable temperatures, with or without the application of pressure, and with or without the use of filler metal.
Weld (seam), английский
Weld all around, английский
Weld all round, английский
Weld area damming, английский
Weld at idle, английский
Allows pipepro 304 to automatically weld at a quieter, lower rpm, using less fuel. when more output is required, he machine goes to high speed without a change in arc.
Weld axis, английский
A line through the length of a weld that is perpendicular in its cross section.
Weld back-up tape, английский
Weld bead, английский
- A weld deposit resulting from a single longitudinal progression of a welding operation along a joint.
- A deposit of filler metal from a single welding pass.
Weld bead shape, английский
Weld buildups, английский
Compaction, английский
- Soil reaction nomenclature, soil compaction
- Уплотнение
- Уплотнение; сжатие
- Уплотнение о ~ by rolling уплотнение катком (грунта, асфальтобетона, бетона и т. п.) deep ~ глубинное уплотнение зернистого грунта (методами виброфлотации, устройства песчаных сваи и т. п.)
- The process of gathering and packing the currently allocated regions of memory or auxiliary storage into as small a space as possible, so as to create as much continuous free space as possible.
- Intermingling
|
Common purlin, английский
In timber-framed construction, one of a number of horizontal timbers that are parallel to the ridge of the roof, and joined to the principal rafters into which they are seated. the upper surfaces of the common purlins and the principal rafters are in the same plane. also
Slippage, английский
- In built-up roofing, the lateral movement between adjacent plies; esp. occurs on sloping roofs. slipper 1. on a running mold, a metal shoe that slides on the running rule. 2.
- Slip 2
- Проскальзывание belt ~ проскальзывание ленты (конвейера)
- The amount of time that a task has been delayed from its original baseline plan. the slippage is the difference between the scheduled start or finish date for a task and the baseline start or finish date.
- Sliding or slipping of the filling threads over the warp ends (or vice versa), which leaves open spaces in the fabric. slippage results from a loose weave or unevenly matched warp and filling. slit-film yarn: yarn of a flat, tape-like character produced by slitting an extruded film.
- The difference between estimated transactions costs and actual transactions costs. the difference usually represents revisions to price difference or spread and commission costs.
|
|
|
|
|
|
|
