|
|
|
|
|
|
|
|
|
Oil-canning
|
Проф. морщинистая металлическая обшивка стен (дефект); волны на металлической кровле (дефект)
|
Buckle, английский
- Also called "oil canning"; a distortion of a metal surface, appearing as a bulge or
- A mast buckles when it suffers by compression, so that the fibre takes a sinuous form, and the grain is upset. also, in polar regions, the bending or arching of the ice upwards, preceding a nip.
- The bend in a piece of drill-stem equipment induced by excessive feed pressure.
- The deformation of component members of a drill derrick, tripod, or mast, caused by attempting to hoist too heavy a load or by applying excessive strain when pulling on stuck casing, etc.
- (1) indentation on a flat face of a casting that may be caused by expansion of molding sand or by the dip coat of an investment casting peeling away from the pattern. (2) local waviness in rolled metal sheet or bar stock, usually transverse to the rolling direction. (3) failure mode of a compressed component that is characterized by unstable lateral deflection.
- (1) indentation on a flat face of a casting that may be caused by expansion of molding sand or by the dip coat of an investment casting peeling away from the pattern. (2) local waviness in rolled metal sheet or bar stock, usually transverse to the rolling direction. (3) failure mode of a compressed component that is characterized by unstable lateral deflection. burnt-in sand: in manufacturing, discontinuity consisting of mixture of sand and metal cohering to surface of casting.
|
|
Camera reduction, английский
The process of photographically reducing the size of a scaled artwork;
Alignment mark, английский
An image selectively placed within or out of an array for either testing or
|
|
|
|
|
|
|
